AMS A680 Full Face Respirator 15-Piece Kit for Painting, Epoxy, Sanding & Woodworking
AMS A680 Full Face Respirator 15-Piece Kit for Painting, Epoxy, Sanding & Woodworking
In stock
- Wide-view visor keeps your work area in view.
- Soft silicone seal and adjustable harness let you fine-tune the fit.
- Replaceable cartridges and pre-filters keep restocking straightforward.
BUNDLE & SAVE
Add compatible spares (optional)
Add compatible spares (optional)
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
FREE Shipping on Orders $79.95+!
Estimated delivery shown at checkout. No surprises!
Product details, contents & compatibility
Product details, contents & compatibility
See more of the job. Build a setup you can reuse. The AMS A680 brings a wide-view visor, soft silicone face seal and adjustable harness together for your next workshop or renovation project.
- Wide-view visor keeps your work area in view.
- Soft silicone seal and adjustable harness let you fine-tune the fit.
- Replaceable cartridges and pre-filters keep restocking straightforward.
What you receive
1 A680 facepiece, 2 selected cartridges, 2 retainers and 10 / 20 / 40 pre-filters in Starter / Pro / Master. The 15-piece count refers to Starter.
Choose A8510 (Organic Vapor), A8530 (Acid Gas) or A8560 (Multi-Gas) according to the cartridge instructions and your exposure.
Fit & compatibility
For compatible AMS A620, A680 and A820 bayonet systems. Check the exact facepiece and cartridge instructions. Does not fit 40mm threaded or A420 push-to-connect systems. Standard eyeglass arms and facial hair can interfere with the seal. Use a suitable spectacle solution if required.
Use & replacement
Remove cartridges and filters before cleaning the facepiece. Follow the supplied care instructions. Do not wash filtration media. Store clean and dry; follow an appropriate cartridge change schedule.
Choose filtration for the identified contaminant and concentration. Read the product instructions and material Safety Data Sheet. Air-purifying respirators do not supply oxygen; do not use in oxygen-deficient, unknown or immediately dangerous atmospheres. Check the face seal before every use.
How long does shipping take?
How long does shipping take?
For U.S residents, shipping takes 4-13 days. For international orders, it takes 10-20 days. We provide tracking for all orders. You can also visit our Track Your Order page for the latest updates.
What is the return policy & fit guarantee?
What is the return policy & fit guarantee?
We stand behind our gear. If the mask doesn't fit perfectly or meet your expectations, you can return it within 30 days in unused condition for a full refund or exchange. We also offer a 1-year warranty against manufacturing defects
Need technical help or filter advice?
Need technical help or filter advice?
Not sure which filter is right for your chemicals? Our safety specialists are ready to assist. Contact us via the chat widget or email support@amsarmor.com. We respond to all technical inquiries within 24 hours.
DESIGNED AROUND THE WAY YOU WORK
-
SOFT SILICONE FACE SEAL
Flexible silicone conforms comfortably around the face, helping create a secure seal without the stiff feel of traditional rubber facepieces.
-
WIDE-VIEW CURVED VISOR
A large polycarbonate visor provides a broad, clear view of your work area, helping you stay aware and focused throughout the job.
-
FOG-REDUCING AIRFLOW
The internal nose cup and downward exhaust design help direct warm, moist breath away from the visor for clearer, more comfortable wear.
-
SECURE, ADJUSTABLE FIT
The 4-point adjustable head harness helps distribute pressure evenly and keeps the respirator securely positioned while you work.
CHOOSE THE RIGHT FILTER FOR YOUR WORK
Different jobs require different types of filtration. Compare the A8510, A8530, and A8560 cartridges to find the option that best matches your application, from painting and organic vapors to acid gases, ammonia, and broader chemical environments.
READY IN 3 SIMPLE STEPS
ATTACH: Align the cartridge with the bayonet connection, push it into place, and twist until securely locked.
ADJUST: Position the A680 over your face and tighten the head harness evenly for a secure, comfortable fit.
CHECK: Perform a seal check before each use to make sure the respirator is properly positioned and sealed.
PRODUCT DETAILS & CARE
Specifications
Specifications
Model: AMS A680 Full-Face Respirator
Facepiece Material: Liquid Silicone Rubber (LSR)
Visor Material: Polycarbonate
Head Harness: 4-Point Adjustable Harness
Filter Connection: Dual Bayonet Connection
Compatible Cartridge System: AMS A85 Series — A8510, A8530 & A8560
Design: Reusable Full-Face Respirator
Fit: Adjustable fit for a wide range of users
Comfort & Fit Guide
Comfort & Fit Guide
01 — LOOSEN
Loosen the head straps before putting on the respirator.
02 — POSITION
Place the facepiece comfortably over your face and pull the harness over your head.
03 — ADJUST
Tighten the straps gradually and evenly until the mask sits securely without excessive pressure.
04 — CHECK THE SEAL
Perform a seal check before every use. Reposition and readjust the respirator if a proper seal cannot be achieved.
Eyeglasses: Standard eyeglass temples may interfere with the face seal. Use an appropriate spectacle solution designed for full-face respirators when required.
Filter & Cartridge Guide
Filter & Cartridge Guide
A8510 — Paint & Organic Vapor
For compatible painting, refinishing, solvents, and organic-vapor applications.
A8530 — Acid Gas & Chemical
For compatible acid-gas and selected chemical applications.
A8560 — Multi-Gas
For work involving a broader range of compatible gases and vapors.
P100 Filters
Use for particulate-focused applications where the P100 configuration is appropriate.
A8501 Pre-Filters
Replace when visibly dirty, damaged, or when breathing resistance noticeably increases.
Gas & Vapor Cartridges
Replace according to the applicable cartridge change schedule and usage conditions. Replace damaged cartridges immediately and do not continue using cartridges beyond their recommended service life.
Important: Always identify the contaminant before selecting a cartridge.
Care & Maintenance
Care & Maintenance
After Use
Remove filters and cartridges before cleaning the facepiece.
Cleaning
Clean the silicone facepiece and visor with mild soap and water or a suitable respirator cleaning wipe. Avoid harsh solvents or abrasive materials.
Drying
Allow all cleaned components to dry completely before reassembly and storage.
Filter Care
Do not wash or immerse gas/vapor cartridges, P100 filters, or particulate pre-filters in water.
Storage
Store the respirator and opened cartridges in a clean, dry, sealed container or bag away from direct sunlight, excessive heat, moisture, and contaminants.
Applications
Applications
PAINTING & REFINISHING
Automotive painting, furniture finishing, coatings, and compatible solvent-based projects.
SANDING & WOODWORKING
Wood sanding, cutting, surface preparation, and other particulate-producing workshop tasks with the appropriate filter configuration.
RENOVATION & DIY
Drywall, surface prep, remodeling, and general workshop projects.
EPOXY & COATING PROJECTS
Resin, flooring, coatings, and similar applications when used with the appropriate cartridge.
SELECTED CHEMICAL APPLICATIONS
A8530 and A8560 provide additional cartridge options for compatible gases and vapors. Always identify the contaminant before use.
Important: The A680 is an air-purifying respirator and does not supply oxygen. Do not use in oxygen-deficient, unknown, or immediately dangerous environments.
FAQ
Q: Can I wear glasses with the A680?
Q: Can I wear glasses with the A680?
Standard eyeglass temples may interfere with the face seal. For the best fit, use a spectacle solution designed for full-face respirators when needed.
Q: Is the visor scratch-resistant?
Q: Is the visor scratch-resistant?
The A680 uses a durable polycarbonate visor designed for demanding work environments. Avoid abrasive cleaners and rough materials that may scratch the surface.
Q: Which cartridge should I choose?
Q: Which cartridge should I choose?
Choose the cartridge based on your application and the contaminants involved. A8510 is for compatible organic-vapor applications, A8530 adds acid-gas capability, and A8560 is designed for broader multi-gas applications.
Q: How often should I replace the filters?
Q: How often should I replace the filters?
Replacement depends on the filter type, working conditions, contaminant exposure, and usage. Replace damaged or heavily soiled filters and follow an appropriate cartridge change schedule.
Q: How do I know if the mask fits correctly?
Q: How do I know if the mask fits correctly?
The facepiece should sit securely and evenly around your face without gaps. Adjust the head straps evenly and perform a seal check before every use.
