• AMS A680 respirator features infographic highlighting anti-scratch polycarbonate visor and soft silicone face seal.
  • Technical details of AMS A680 mask showing adjustable 4-point head harness and cool flow exhaust valve.
  • Close-up of AMS A680 interior showing hypoallergenic soft silicone seal and wide face gasket for comfort.
  • AMS filter cartridge selection guide comparing A8510 for Organic Vapor, A8530 for Acid Gas, and A8560 Multi-Gas.
  • Woodworker using AMS A680 full face respirator for dust protection while sanding in a workshop.
  • AMS A680 respirator kit components including mask body, KN95 particulate filters, retainers, and gas cartridges.

In stock

AMS A680 Professional Full Face Respirator Mask 17-in-1 Kit for Auto Painting, Epoxy, Sanding & Woodworking Dust Protection

AMS A680 Professional Full Face Respirator Mask 17-in-1 Kit for Auto Painting, Epoxy, Sanding & Woodworking Dust Protection

 (1798 Reviews)
100+ orders
in the last 24h
$59.99
$59.99 $89.00
SAVE 32% Sold out

BUNDLE & SAVE

check_circle 1-Year Warranty

check_circle Fast US Shipping

check_circle 30-Day Money Back

OFFER ENDING TONIGHT!

AMS A680 Professional Full Face Respirator Mask 17-in-1 Kit for Auto Painting, Epoxy, Sanding & Woodworking Dust Protection

AMS A680 Professional Full Face Respirator Mask 17-in-1 Kit for Auto Painting, Epoxy, Sanding & Woodworking Dust Protection

$89.00 $59.99
   
Pair of AMS A8510 Organic Gas Filter Boxes brown label GB 2890-2022 certified for painting

AMS A8510, A8530, and A8560 Gas and Vapor Filter Cartridges - Standard Bayonet Fit

$19.00

Certified replacement cartridges. High-density carbon blocks organic vapors and fumes instantly.

   
AMS A8501 Advanced Particulate Pre-Filters for Push-to-Connect Respirators

AMS A8501 Advanced Particulate Pre-Filters for Push-to-Connect Respirators

$15.00

Essential snap-on covers. Securely holds A8501 cotton filters to prevent dust clogging and extend cartridge life.

Total:

FREE SHIPPING INCLUDED

$123.00 $93.99

 
add_shopping_cart

-

Ordered

local_shipping

- - -

Order Ready

redeem

- - -

Delivered

AMS A680 Professional Full Face Respirator Mask 17-in-1 Kit for Auto Painting, Epoxy, Sanding & Woodworking Dust Protection

AMS A680 Professional Full Face Respirator Mask 17-in-1 Kit for Auto Painting, Epoxy, Sanding & Woodworking Dust Protection

$59.99
$59.99 $89.00
SAVE 32% Sold out

Toxic fumes and fine sawdust can cause severe respiratory damage while blinding your vision. The AMS A680 full face respirator mask is your ultimate 3-in-1 protective shield, engineered to secure your lungs, eyes, and hearing on any heavy-duty job site.

Core Benefits

  • "Zero-Fog" Panoramic Shield: Smart convection airflow guarantees crystal-clear vision. You can work continuously without wiping your lens, ensuring absolute visual precision against flying wood debris or chemical splashes.
  • "Unbox & Work" 17-Piece Station: Stop buying expensive, piecemeal accessories. This complete paint mask kit provides everything you need for 3 to 6 months of continuous, heavy-duty projects.
  • Total Sensory Armor: We integrated noise-reducing earplugs to block deafening workshop sounds. Carpenters and auto mechanics can now endure noisy machinery and toxic spray paint without physical fatigue.
  • Marathon-Comfort Seal: The premium silicone edge evenly distributes weight across your face. This airtight seal prevents painful red pressure marks while ensuring a leak-proof fit for intense 8-hour shifts.

What's Included in Your Kit

Your 17-piece station is ready for immediate deployment. Please select your required cartridge variant before checkout:

  • 1 x AMS A680 Full-Face Mask: Rugged design with wide-angle visibility.
  • 2 x Filter Cartridges: Choose between Paint & Organic Vapor, Chemical & Acid Gas, or Multi-Gas depending on your specific hazards.
  • 2 x AMS P100 Particulate Filter Cartridges: High-efficiency filters for dust and airborne particle protection.
  • 10 x Particulate Cotton Filters: Essential outer layers to block fine dust.
  • 2 x Filter Retainer Covers: Securely locks your cotton filters in place.
shopping_cart_checkout

How long does shipping take?

For U.S residents, shipping takes 4-13 days. For international orders, it takes 10-20 days. We provide tracking for all orders. You can also visit our Track Your Order page for the latest updates.

sync

What is the return policy & fit guarantee?

We stand behind our gear. If the mask doesn't fit perfectly or meet your expectations, you can return it within 30 days in unused condition for a full refund or exchange. We also offer a 1-year warranty against manufacturing defects

🛠️

Need technical help or filter advice?

Not sure which filter is right for your chemicals? Our safety specialists are ready to assist. Contact us via the chat widget or email support@amsarmor.com. We respond to all technical inquiries within 24 hours.

  • ⭐⭐⭐⭐⭐ "The silicone seal is a game changer. I wore this for an 8-hour shift and had zero red marks or irritation on my face. Way softer than my old rubber mask."

    — Mike T., Industrial Sander

  • ⭐⭐⭐⭐⭐ "Finally, no more tunnel vision! The panoramic lens lets me see everything around me, and the nose cup kept the visor completely fog-free while I was painting."

    — Chris A., Auto Body Technician

  • ⭐⭐⭐⭐⭐ "I work with strong pool acids and safety glasses weren't enough. This full-face mask seals perfectly and protects my eyes from fumes. Total peace of mind."

    — David R., Chemical Handler
    View full details

    Stop Choosing Between Safety and Comfort

    Upgrade to the AMS A680. Designed for professionals who demand industrial-grade protection without the headaches, fogging, or skin irritation. Perfect for painting, chemical handling, and sanding.

    Key Features

    • Woodworker using AMS A680 full face respirator for dust protection while sanding in a workshop.

      No More Pressure Marks or Skin Irritation

      Forget stiff rubber masks that dig into your face. The AMS A680 is crafted from Food-Grade Silicone, the same material used in medical devices. It’s hypoallergenic, incredibly soft, and maintains a perfect airtight seal even in extreme heat (up to 200°C).

    • Crystal Clear, Panoramic Vision


      Eliminate dangerous "tunnel vision" with our >200° 3D Curved Visor. The internal nose cup prevents fogging by directing breath away from the lens, while high-impact Polycarbonate shields your eyes from sparks and debris (ANSI Z87.1 equivalent).

    • Stay Cool with Downward Exhaust

      Don't let heat stress slow you down. The mask features a large Downward Exhaust Valve that rapidly expels hot air and moisture. This keeps the inside of the mask cool and prevents your breath from blowing onto your work surface—critical for precision painting.

    • APF 50 Industrial Rating

      Engineered to meet strict GB 2890-2022 standards , the A680 provides an Assigned Protection Factor (APF) of 50. With a dual-filter bayonet system and a 4-point adjustable head harness, it creates a secure seal that blocks 99.95% of targeted airborne contaminants.

      Compare Protection Levels

      Not sure which kit to choose? Find your hazard match below.

      Step-by-step instruction guide for installing filters and wearing the AMS A620 safety mask correctly

      READY IN 4 STEPS

      INSTALL: Align the filter notch, push, and twist clockwise until it clicks.

      GEAR UP: Pull the head harness over the crown of your head and hook the neck strap.

      SEAL CHECK: Cover the filters with your hands and inhale. The mask should collapse slightly (airtight).

      MAINTAIN: Wipe the TPU body with warm soapy water after use. Store in a sealed bag.

      Why AMS A680 is the Ultimate Shield

      Stop compromising between safety and visibility. The only full-face respirator crafted from food-grade liquid silicone for superior sealing, offering a panoramic view that keeps you safe without slowing you down.

        Others
      Soft Food-Grade Silicone
      >200° Panoramic Vision
      Zero-Fog Nose Cup Design
      APF 50 High-Seal Rating

      Verified Customer Reviews

      Excellent 4.8 / 5

      • Feels like a second skin – No more rashes!

        "I have sensitive skin and traditional black rubber masks always left me with red, itchy marks after an hour. The food-grade silicone on this A680 is incredibly soft and hypoallergenic. I wore it for a 6-hour epoxy floor project and honestly forgot I had it on. Zero irritation."

        Michael T. – Epoxy Specialist

      • Zero fogging and incredible visibility

        "I used to struggle with goggles fogging up over my half-mask. This A680 solves that completely. The internal nose cup keeps my breath away from the visor, so the glass stays crystal clear even in humid Florida heat. The wide panoramic view means no dangerous blind spots while I'm painting."

        Sarah J. – Automotive Painter

      • Total protection against acid fumes

        "I work with industrial cleaning acids, and safety glasses weren't enough—my eyes would still sting from the vapors. This mask seals perfectly (passed the negative pressure check instantly). Having an APF 50 rating for both my lungs and eyes gives me total peace of mind. Worth every penny."

        David R. – Chemical Technician

        Technical Deep Dive

        discover_tune

        Specifications

        Material: Premium Food-Grade Liquid Silicone Rubber (LSR).

        Visor Material: Anti-Scratch & Impact-Resistant Polycarbonate.

        Standard: Industrial Grade Protection (GB 2890-2022 / Comparable to EN 136).

        Connection Type: Universal Dual Bayonet Connection (Fully compatible with AMS A85xx filter series).

        Harness: 4-Point Adjustable Head Cradle for balanced weight distribution.

        Size: Universal Fit with highly adjustable straps.

        rule_folder

        Comfort & Fit Guide

        4-Point Harness System: Loosen all four straps before putting the mask on. Pull the harness over the crown of your head, then tighten the bottom straps first, followed by the top straps for a balanced, secure fit.

        Food-Grade Silicone Seal: The premium liquid silicone naturally conforms to your facial structure. Avoid overtightening the straps; the silicone requires only gentle pressure to create a perfect APF 50 seal.

        Glasses Compatibility: Due to the internal nose cup and tight seal requirements, standard prescription glasses with thick frames may interfere with the seal.

        developer_guide

        Filter Replacement Guide

        Universal Bayonet System: Your AMS respirator is compatible with our full range of standard bayonet-style filters and cartridges.

        When to replace Cotton Filters (e.g., A8501): Replace immediately if they become visibly dirty, damaged, or if you notice a significant increase in breathing resistance.

        When to replace Chemical Cartridges: Replace according to your workplace safety schedule, or immediately if you begin to smell or taste contaminants inside the mask.

        box_add

        Care & Maintenance

        Cleaning: After each use, remove the filters and wipe the silicone facepiece and visor with warm, soapy water or unperfumed respirator cleaning wipes. Do not use solvents.

        Storage: Dry completely before storing. Keep the mask in a sealed bag or container away from direct sunlight, extreme temperatures, and hazardous chemicals.

        Filter Care: Never wash or immerse filter cartridges or cotton filters in water. Store opened cartridges in an airtight bag to prolong their lifespan.

        apps

        Applications

        🎨 Spray Painting & Finishing: Ideal for automotive bodywork, furniture staining, epoxy resin art, and applying enamels.

        🧪 Chemical Handling: Essential protection for pesticide spraying, pool maintenance (acid wash), and industrial laboratory processing.

        ⚠️ Heavy Construction: Designed for hazardous tasks like mold remediation, fiberglass insulation installation, and demolition cleanup.

        🪵 Dust & Grinding: Filters out fine particulates from wood sanding, metal cutting, and drywall installation (using the included KN95 pre-filters).

        FAQ

        eyeglasses_2_sound

        Q: Does this mask work with glasses?

        A: Full-face masks generally require a specific spectacle kit to maintain a proper seal. Wearing standard glasses underneath may compromise safety.

        diamond

        Q: Is the visor scratch-resistant?

        A: Yes, the polycarbonate visor is treated for scratch resistance and high impact protection.

        swap_horiz

        Q: How often should I change the filters?

        A: Particulate pre-filters should be changed when breathing becomes difficult. Gas cartridges should be changed immediately if you detect any smell or taste of the contaminant.